Steps of using polymer bandages

Polymer bandage is an upgraded product of traditional plaster bandage. It is mainly composed of imported polyurethane, polyester and polymer fiber. It is hygienic, simple, light, fast to harden, not afraid of water, non-toxic, and has no side effects. It is an orthopedic external fixation Ideal fixing material.

Wuxi S&Y Co., Ltd. is a modern high-tech enterprise, a comprehensive production factory integrating technology research and development, industrial medical product production and domestic and foreign trade sales. The main products are: polymer fixed bandages and medical polymer splints for external fixation supplies of orthopedics in hospitals;

Let ’s share the steps of using polymer bandages.

1. Fix the part and lined with cotton pad;

2. After the bandage is unsealed, immerse it in water at normal temperature 20 ℃ ~ 25 ℃ for about 4 ~ 8 seconds;

3. To force out the remaining water, you must use one roll to open the other to prevent hardening in advance;

4. Spiral winding, 1/3 or 1/2 overlapping 6-9 layers;

5. Tighten and wrap the polymer bandage of Westenbonny to increase the adhesion between the layers, but the winding should not be too tight, so as not to affect the blood circulation, and it will begin to solidify in 8-15 minutes;

6. After bandaging, rub the kneading layer and the layer outside the bandage to fully adhere;

7. After the bandage is wet, you can use a hair dryer to dry it.

8. Use a scalpel and a chainsaw when removing.

Readers of this article also read:    Characteristics of polymer bandages     Binding method of polymer bandage