Wuxi S&Y Co., Ltd.
Wuxi S&Y Co., Ltd.
 Welcome to the official website of Wuxi S&Y Co., Ltd.! 

Wuxi S&Y Co., Ltd.

International   Trade

Tel: +86-510-88210065  
Mobile: 0086-137 7117 8036

QQ: 37018 3955     

Contact Person: Miss Li

Address: No.158 Xigang West Road, Xibei Town, Xishan District, Wuxi City, Jiangsu Province

online service
 Work Time
Mon to Fri :8:30-17:30
Sat to Sun :9:00-17:00
 Contact Details
Address:No.158 Xigang West Road, Xibei Town, Xishan District, Wuxi City, Jiangsu Province
Article recommendation

The polymer splint is a new type of material with simple structure and ingenious design. When in use

Polymer splint is a special synthetic polymer polyester low-temperature thermoplastic sheet. It is a

Share to:

The seventh generation of medical polymer splint SS312

Product Details

SS312第七代医用高分子夹板1 拷贝.jpg

产品介绍 拷贝副本.jpg

SY's seventh-generation medical polymer splint, the new splint, is an upgraded product of other medical polymer splints. Not sweltering in summer to reduce sweating; not cold and comfortable in winter!

At the beginning of 2019, based on the fifth-generation mesh plywood and the sixth-generation color 3D mesh medical polymer splint, Wuxi Shengyi developed and introduced the seventh-generation medical high-tech based on the clinical use of the hospital and the production of our factory for many years. Molecular splint. In August 2019, the seventh-generation polymer splint was finalized and Shengyi's seventh-generation medical polymer splint is novel in form and easy to use,eliminating hidden dangers. Avoiding the leakage of glue like other splints into the non-woven fabric liner, and curing into gel thorns after curing, which will hurt the The seventh-generation medical polymer splint avoids patient complaints and doctor-patient disputes caused by wet pads like other splints. (After the other splints are soaked in water, the wet non-woven fabric pads contact the affected area, which is cold and humid in winter and summer, and the affected area is prone to inflammation and discomfort.)

SY's seventh-generation medical polymer splint uses a good mesh fabric produced by Korean companies, 7 ~ 8 layers of glue, and is equipped with a colorful 3D three-dimensional elastic mesh fabric. It has good air permeability and excellent cushioning protection. Comfortable, beautiful and durable, easy to operate.

Medical polymer splint Product catalog, category: Class I, 6810 -13-Other instruments for orthopedics (orthopedics)-Auxiliary tools for wound surgery Intended use, scope of application: Orthopedics for external fixation of fractures, orthopedics.


The doctor's operation is more convenient: when operating the splint, the doctor does not need to wear gloves, heating equipment, and do not soak in water. The splint cloth cover is used as a water container. The pad fits the fracture site, and the upper splint is shaped into a semicircular tube. Wrap tightly with self-adhesive elastic bandages together. It only takes 3 minutes to cure and 10 minutes to cure.

Patients are more comfortable to use: light, sturdy, more breathable, convenient and comfortable, and bathable. After the fracture is reduced, the patient can adjustthe tightness of the splint by himself, which is more comfortable. The plywood is equipped with a highly water-resistant, breathable, antibacterial, moisture-proof,and mildew-resistant non-woven fabric. The thick non-woven cushion is soft and comfortable. The middle layer of plywood is coated with 7 ~ 8 layers of mesh cloth, which has high strength and good air permeability. The patient can release the splint by himself, wipe and dry the affected part in the bath, and then tie the splint, which is convenient, comfortable and more humane.



Model / Specification

Basic size

(width x length)

Packing quantity

(n bags / 2 boxes / 1 box)

Applicable crowd parts



7.5 cm × 30 cm


Child or adult short arm



7.5 cm × 90 cm


Child or adult short arm



10 cm × 40 cm


Short arms, short legs



10 cm × 50 cm


Short arms, short legs



10 cm × 75 cm


Short arms, long legs



12.5 cm × 75 cm


Short arms, long legs



12.5 cm × 115 cm


long legs



15 cm × 75 cm


long legs



15 cm × 115 cm


long legs

The formula production process of medical polymer splint, polymer fixing bandage and industrial winding tape produced by Wuxi Shengyi Company for external fixation of limb fractures. It is a technical staff of Wuxi Ximei Polymer Bandage Factory and Shanghai Synthetic Resin The institute has developed formulas and processes for water-curable polyurethane adhesives.
In 2012, we cooperated with Germany to develop a new and advanced automated production line, imported high-quality raw materials, and adopted high-quality environmental protection mesh fabrics produced by Korean companies. Shengyi products are positioned as high-end products, pay attention to environmental protection, only make fine products, and launch the fifth generation of medical polymer splints with environmental protection mesh.
Main production products: Polymer orthopedic bandages and medical polymer splints for external fixation supplies of orthopedics in hospitals; armored tapes (industrial armored tapes) for cable connector outer protection; HG welding clamp insulation protective tape; SY pipeline repair plugging tape, tool repair Universal wrapping tape such as tape, reinforced anticorrosive tape.
Wuxi SY introduces a scientific and modern modern enterprise management system, adhering to the business purpose of "serving human health" and under the guidance of the business philosophy of "integrity first, quality first", adhering to the "sacred heart and patronage of the public" "Enterprise spirit, adhere to the" customer first, fast response, win-win cooperation "principle, and jointly create a high starting point and high speed of successful development. Wuxi Shengyi Company is a long-term excellent partner of many domestic and foreign medical device sales companies, and it will also be your preferred cooperation.